Maintenance of the artificial grass pitch
Pay attention to the hardware on artificial turf pitches scratch: such as spikes, discus, Darts play its feet must be soft plastic, not the poor quality of the soles of the shoes to wear in artificial soccer grass on the pitch, playing The soles friction Stadium on the scratches.
Artificial grass stadium construction after the completion of required conservation 5-7 days before playing in the above, corrosive liquids or other things to destroy the the stadium surface layer surface of the plastic should be avoided during the maintenance period.
, School teachers and students in the use of the stadium must be replaced by rubber-soled shoes can not wear shoes with dirt, to avoid the topcoat scratching of the surface layer, dirty, and not lose the gum above the pitch.
4, the court shall not ride a bike up, shall not drive a motor vehicle up.
, Clean artificial grass stadium with a soft absorbent good mop or wet and dry vacuum cleaner with water or detergent.
the paving Note of the artificial grass pitch
Artificial soccer grass stadium before the construction of the basis of processing: the basis the flatness of detection, label detection, according to IAAF standards: ISO14001: 2004 synthetic grass stadium foundation treatment standards
Visual asphalt foundation ground dense shell can not sand, whether there is uneven hardness label based on whether the target.
3, with the hammer grassroots, check whether the strength to meet the design requirements have no basis for delamination.
4, artificial turf basis of the ground after routine maintenance must be dry, containing water in deep 25mm thickness of not more than 5%
5, the flatness of the ground 3m straightedge and wedge feeler check allowable deviation shall not be greater than 3 mm.
6, artificial turf underlying ground waterproof isolation layer.
7, with chisel the mouth hammer, shovels and other tools, to remove the surface soft and residual cement slag cleaning and dust with a vacuum cleaner.
8, a small amount of oil pollution at scrub with a solvent such as acetone, until the contaminants are removed, the solvent evaporation; grinding tools can also be used rubbed off.
9 local bump at ground local polished, the cracks open V groove with a chisel, artificial grass stadium filled patch crack at the slowly poured into the feed hole compaction polished.
No comments:
Post a Comment